AN3133 Havoc Pro/Ballistic Brushless System 10.5T

 
 
 
 
 
 
 
 
HAVOC PRO/BALLISTIC BRUSHLESS SYSTEM FEATURES
 
 
 
Sensor-based for excellent torque and low-speed driveability 
 
 
 
Oversized front bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life 
 
 
 
Rebuildable motor design with removable shielded sensor harness, rotor, sensor assembly, wound stator, bearing cap, hardware, sleeve and both end bells
 
 
 
Nickel-plated, 12.3mm sintered Neodymium rotor with a 0.125” pinion shaft that accepts all existing pinion gears 
 
 
 
Nine adjustable parameters: Minimum Brake (10 settings from 0-30%), Drag Brake (10 settings from 0-30%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-12%), Throttle Curve (Linear, Expo-1 and Expo-2), Brake Frequency (7 settings from 1-8 kHz), Reverse, Motor Rotation and Battery Pack Selection (Li-Po, Li-Fe, Ni-MH)
 
 
 
Fifty percent more transistors than the Havoc 2S ESC for faster speeds, higher efficiency and increased load handling
 
 
 
One-Touch Set-Up for quick, easy transmitter setup
 
 
 
Locked Rotor Detection and Thermal Overload Protection (when used with a Novak sensored brushless motor)
 
 
 
Novak’s Radio-Priority and Polar Drive Circuits
 
 
 
Included 30x30x6mm ESC clear cooling fan (#5648) mounted on factory-installed heat sink
 
 
 
Meets RoHS compliance and includes 120-Day Warranty
 
 
 
Designed, assembled and tested by Novak in Irvine, Calif., using globally sourced components

 
 
 
 
NOVAK’S HAVOC PRO/BALLISTIC BRUSHLESS SYSTEM SPECIFICATIONS
 
 
 
System Motor Turns
 
 
3.5T
 
 
6.5T
 
 
10.5T
 
 
13.5T
 
 
17.5T
 
 
 
Part Number
 
 
#3130
 
 
#3132
 
 
#3133
 
 
#3134
 
 
#3135
 
 
 
Color-Coded Stator
 
 
Black
 
 
Black
 
 
Blue
 
 
Orange
 
 
Yellow
 
 
 
Kv (unloaded)
 
 
10,500 RPM/Volt
 
 
6,400 
RPM/Volt
 
 
4,200 
RPM/Volt
 
 
3,300 
RPM/Volt
 
 
2,200 
RPM/Volt
 
 
 
Watts
 
 
620
 
 
390
 
 
235
 
 
195
 
 
130
 
 
 
Motor Size
 
 
2.07” x 1.41” (52.6 x 35.8 mm)
 
 
 
 
 
 
 
System Weight (w/o wires)
 
 
7.96 oz. (225.7 g)
 
 
 
 
 
 
 
Input Voltage
 
 
2S Li-Po cells, 2S Li-Fe cells or 4-6 NiMH cells (1.2V/cell)
 
 
 
 
 
 
 
ESC Footprint
 
 
1.16” x 1.49” (29.5 x 37.8mm)
 
 
 
 
 
 
 
Motor Limit
 
 
All 3.5-turn Novak 540-size sensored brushless motors
 
 
 
 
 
 
 
On-Resistance
 
 
0.00040 ohms @ 25°
 
 
 
 
 
 
 
BEC
 
 
6.0 volts DC / 3.0 amps
 
 
 
 
 
 
 
Rated Current
 
 
540 Amps @ 25°C trans. temp.
 
 
 
Braking Current
 
 
540 Amps @ 25°C trans. temp.
 
 
 
Status LEDs
 
 
4
 
 
 
 
 
 
 
Voltage Cut-Off
 
 
6.25V (Li-Po), 4.75V (Li-Fe)
 
 
 
 
 
 
 
Power Wires (battery/motor)
 
 
14G Super-Flex Copper-Strand Silicone Wire
 
 
 
 
 
 
 
Recommended Use
 
 
On-Road High Traction / Basher
 
 
Off-Road Medium Traction / Basher
 
 
10.5T spec-brushless racing
 
 
13.5T spec-brushless racing
 
 
17.5T spec-brushless racing
 
 
|spacebar|