3038 Havoc Sport Sensored Brushless System

perfect complement to Traxxas’® Slash Pro 2WD Short Course Truck™, 
HPI’s® E-Firestorm 2WD 1/10th Stadium Truck™, 
Kyosho’s® LAZER ZX-5 SP™ and other 1/10-scale off-road and on-road vehicles.

 
 
 
 
 
 
 
 
 
HAVOC SPORT SENSORED BRUSHLESS SYSTEM FEATURES
 
 
 
Fully programmable, user-friendly interface with nine adjustable parameters: Minimum Brake (10 settings from 0-27%), Drag Brake (10 settings from 0-27%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-5%), Throttle Curve (Linear and Expo), Brake Frequency* (7 settings from 1-8 kHz), Reverse*, Motor Rotation* and Li-Po Cut-Off 
 
 
 
Novak’s One-Touch Set-Up™ for quick, easy transmitter setup 
 
 
 
Novak’s Smart Braking II™ enables users to "shift" from forward to reverse 
 
 
 
Water-resistant case with gasket seal 
 
 
 
Sensor-based for excellent braking and low-speed driveability
 
 
 
Nickel-plated, high-strength sintered rotor for increased motor acceleration, improved initial throttle response, improved performance in high-temperature conditions and natural drag brake
 
 
 
Oversized front bearing for increased load handling and bearing life
 
 
 
Auto Detect Brushed Motor Mode
 
 
 
Locked Rotor Detection and Thermal Overload Protection
 
 
 
Meets RoHS compliance and includes 120-Day Warranty
 
 
 
Designed and assembled by Novak in Irvine, California, using globally-sourced components
 
 
 
 
 
 
 
HAVOC SPORT SENSORED BRUSHLESS SYSTEM SPECS
 
 
 
Input Voltage: 2S Li-Po cells or 4-7 NiMH cells (1.2V/cell) 
 
 
 
ESC Footprint: 1.18” x 1.54” (30.0 x 39.1 mm) 
 
 
 
Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
 
 
 
System Weight (with wires): 9.59 oz. (272.0 g)
 
 
 
Design: Sensor-based
 
 
 
Motor Limit (brushless): 8.5-turn Novak 540-size sensored motor
 
 
 
Motor Limit (brushed): 27-turn for 540-size motor / 12-turn for 550-size motor
 
 
 
On-Resistance (brushless): 0.0012 ohms @ 25°C trans. temp. 
 
 
 
BEC: 6.0 volts DC / 1.5 amps 
 
 
 
Rated Current: 120 Amps @ 25°C trans. temp.
 
 
 
Braking Current: 120 Amps @ 25°C trans. temp.
 
 
 
Status LEDs: 4
 
 
 
Voltage Cut-Off: 6.25V (when Li-Poly Cut-Off Circuitry is enabled)
 
 
 
Power Wires: 14G Super-Flex Copper-Strand Silicone Wire with Tamiya Battery Plug
 
 
 
Motor Magnet: 12.3 mm Sintered, high-strength Neodymium
 
 
 
Motor Watts: 225
 
 
 
Motor Turn: 8.5|spacebar|
 
 
 
Motor KV (unloaded): 5,000
 
 
 
Shaft Diameter: 0.125” (3.2 mm) [accepts all existing pinion gears]
 
 
 
Bearing Size: 1/2” x 3/16” (12.7x4.8mm)
|spacebar|