3038 Havoc Sport Sensored Brushless System
perfect complement to Traxxas’® Slash Pro 2WD Short Course Truck™,
HPI’s® E-Firestorm 2WD 1/10th Stadium Truck™,
Kyosho’s® LAZER ZX-5 SP™ and other 1/10-scale off-road and on-road vehicles.
HAVOC SPORT SENSORED BRUSHLESS SYSTEM FEATURES | ![]() | Fully programmable, user-friendly interface with nine adjustable parameters: Minimum Brake (10 settings from 0-27%), Drag Brake (10 settings from 0-27%), Dead Band (5 settings from 2-6%), Minimum Drive (5 settings from 1-5%), Throttle Curve (Linear and Expo), Brake Frequency* (7 settings from 1-8 kHz), Reverse*, Motor Rotation* and Li-Po Cut-Off | ![]() | Novak’s One-Touch Set-Up™ for quick, easy transmitter setup | ![]() | Novak’s Smart Braking II™ enables users to "shift" from forward to reverse | ![]() | Water-resistant case with gasket seal | ![]() | Sensor-based for excellent braking and low-speed driveability | ![]() | Nickel-plated, high-strength sintered rotor for increased motor acceleration, improved initial throttle response, improved performance in high-temperature conditions and natural drag brake | ![]() | Oversized front bearing for increased load handling and bearing life | ![]() | Auto Detect Brushed Motor Mode | ![]() | Locked Rotor Detection and Thermal Overload Protection | ![]() | Meets RoHS compliance and includes 120-Day Warranty | ![]() | Designed and assembled by Novak in Irvine, California, using globally-sourced components | |
HAVOC SPORT SENSORED BRUSHLESS SYSTEM SPECS | ![]() | Input Voltage: 2S Li-Po cells or 4-7 NiMH cells (1.2V/cell) | ![]() | ESC Footprint: 1.18” x 1.54” (30.0 x 39.1 mm) | ![]() | Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm) | ![]() | System Weight (with wires): 9.59 oz. (272.0 g) | ![]() | Design: Sensor-based | ![]() | Motor Limit (brushless): 8.5-turn Novak 540-size sensored motor | ![]() | Motor Limit (brushed): 27-turn for 540-size motor / 12-turn for 550-size motor | ![]() | On-Resistance (brushless): 0.0012 ohms @ 25°C trans. temp. | ![]() | BEC: 6.0 volts DC / 1.5 amps | ![]() | Rated Current: 120 Amps @ 25°C trans. temp. | ![]() | Braking Current: 120 Amps @ 25°C trans. temp. | ![]() | Status LEDs: 4 | ![]() | Voltage Cut-Off: 6.25V (when Li-Poly Cut-Off Circuitry is enabled) | ![]() | Power Wires: 14G Super-Flex Copper-Strand Silicone Wire with Tamiya Battery Plug | ![]() | Motor Magnet: 12.3 mm Sintered, high-strength Neodymium | ![]() | Motor Watts: 225 | ![]() | Motor Turn: 8.5|spacebar| | ![]() | Motor KV (unloaded): 5,000 | ![]() | Shaft Diameter: 0.125” (3.2 mm) [accepts all existing pinion gears] | ![]() | Bearing Size: 1/2” x 3/16” (12.7x4.8mm) | |
|spacebar|