BALLISTIC MEETS CRAWLER
 
Novak’s next-generation Ballistic motors have entered thecrawling field. The high-performance Ballistic Crawler Brushless Motors – 13.5T (#3614), 18.5T (#3618) and 21.5T (#3619) are expected to be some of the most sought after brushless crawling motors on the market. Because of their extreme versatility, the Ballistic Crawler Motors can tackle all crawling conditions with a simple stator switch. The crawler-specific hardware is located outside of the hand-wound stators, drivers can replace the stators at any time to properly combat any type of terrain or course.
 
 
 
 
 

Novak`s high-quality Crawling Sintered Tuning Rotor -- 14mm (#5950) is included with Novak`s Ballistic Crawler Brushless Motors.
 
HIGH-END CRAWLER MOTOR
And like all Novak Ballistic motors, the Ballistic Crawlers contain heavy-duty solder tabs and a removable nine-inch shielded sensor harness. And by taking advantage of the Ballistics’ interchangeable wound stator construction, crawlers can simply replace the installed stator for any available stator between 13.5 and 21.5 turns. The motors are also equipped with a custom-silicone gasket seal to keep dirt and debris from damaging the motors’ sensor plug. The Ballistic Crawler motors also include a Crawling Sintered Tuning Rotor - 14mm (#5950). The rotor’s large diameter and exclusive magnetic material provide the motors with more torque and stronger braking. It also increases natural drag braking and improves the motors’ initial throttle response, providing more control on steep climbs and downhill descents.
 
 
 
 
 
 
 
 
 
BALLISTIC CRAWLER BRUSHLESS MOTOR FEATURES 
 
 
 
Sensor-based for excellent braking and low-speed driveability
 
 
 
Compatible with Novak`s Timbuk2, Goat 2S, Goat 3S and other crawling brushless ESCs
 
 
 
Oversized front motor bearing [1/2” x 3/16” (12.7 x 4.8mm)] for increased load handling and bearing life
 
 
 
Completely rebuildable motor design 
 
 
 
Nickel-plated Crawling Sintered Tuning Rotor -- 14mm (#5950) with 0.125” pinion shaft that accepts all existing pinion gears included with Ballistic Crawler motors.
 
 
 
Meets RoHS compliance and includes 120-Day Warranty
 
 
 
Designed and assembled by Novak in Irvine, Calif., using globally-sourced components 
 
 
 
 
BALLISTIC CRAWLER BRUSHLESS MOTOR SPECS
 
 
 
Design: Sensor-based 
 
 
 
Motor Size: 2.07” x 1.41” (52.6 x 35.8mm)
 
 
 
Motor Weight: 6.6oz. (187.0g)
 
 
 
Kv: 2,000 (#3614); 1,650 (#3618); 1,350 RPM/VOLT (#3619)
 
 
 
Watts: 195 (#3614); 119 (#3618); 85 (#3619)
 
 
 
Sensor Harness: 9” (230mm)
 
 
 
 
REPLACEMENT / OPTIONAL PARTS
 
 
 
#5351-#5353 Brushless Shielded Sensor Harnesses – 4” & 6” (optional) 9” (replacement)
 
 
 
#5936 Ceramic Ball Bearing ABEC-5 (3/16"I.D. x 1/2"O.D. x 0.1960"W) (optional)
 
 
 
#5937 Steel Ball Bearings ABEC-3 (1/8"I.D. x 3/8"O.D. x 5/32"W) (replacement)
 
 
 
#5938 Steel Ball Bearings ABEC-5 (3/16"I.D. x 1/2"O.D. x 0.1960"W) (replacement)
 
 
 
#5940 Ballistic Front End Bell and Bearings – 1/8” (replacement)
 
 
 
#5941 Ballistic Sintered Rotor – 12.3mm (optional)
 
 
 
#5950 Crawling Sintered Tuning Rotor - 14mm (replacement)
 
 
 
#S5357 & #S5358 Brushless Motor Shielded Sensor Extension Harness – 4" & 9” (optional)
 
 
 
#S5420-#S5424 Brushless Motor Sleeves (replacement/optional)
 
 
 
#S5932 Ballistic Motor Hardware Kit (replacement)
 
 
 
#S5943 Ballistic Bearing Cap/Replacement Rear Bearing (replacement) 
 
 
 
#S5944 Ballistic Back End Bell (replacement) 
 
 
 
#S5945 Ballistic Crawler Sensor Assembly (replacement)
 
 
 
#S5946 Ballistic Ceramic Ball Bearing and Bearing Cap (optional)
 
 
 
#S6613-#S6621 Ballistic Wound Stators – 13.5T-21.5T (replacement/optional)
 

*Kv readings are measured with Crawling Sintered Tuning Rotor -- 14mm (Novak #5950).One-Touch™, Goat™ 3S Crawler Brushless Systems, Ballistic™ Crawler Brushless Motors, and Timbuk2™ Crawler Brushless ESCs are registered trademarks of Novak Electronics, Inc.®