M2 DIG 3S DUAL BRUSH ESC | | |spacebar| | | |spacebar| | | To view a slideshow featuring Novak`s full line of crawling products, click here. | |spacebar| | | | FIRST DUAL MOTOR ESC To check out Car Action`s video of the M2 Dig 3S Dual Brush ESC, click here. | Picture the functionality and utility of two Novak Goat Crawler Speed Controls in brushed mode and Novak’s Dig Unit; now, envision it in one highly programmable, inexpensive speed control and you get the first-of-its-kind, dual-motor compatible M2 Dig 3S Dual Brush ESC (#1846). Combined with two brushed motors, the M2 Dig independently controls the motors to perform dig maneuvers. In addition to standard digs, the M2 sports independent biasing of the front and rear motors to allow for precise maneuverability through tricky terrain, and exceptional control on steep inclines and downhill descents. The M2 ESC is compatible with any Super Crawler dual-system rig, such as EnRoute’s® Berg™, Integy’s® Super and Unlimited Class of crawlers, and Clod Buster®-based vehicles. SPECIALIZED DIG The small and light M2 Dig is easy to install and operate. There are three fully programmable throttle profiles: The M2 Dig 3S ESC/Dual Terra Claw Brush Motor Combo installed in a Berg™ Crawler. | Dig Mode is the standard mode. It uses drag brake to create dig. This mode requires a proportional switch or a simple three-position switch to operate. Proportional Dig Mode. Using the third channel on a three-channel surface receiver, Novak’s patent-pending, proportional dig software allows drivers to fine tune the amount of power supplied to the individual motors. This innovative feature provides seemingly endless mixing between the vehicle’s two motors. Single Motor Brushed Mode is for drivers with single-motor crawlers. This mode allows drivers to solder all four motor wires to one brushed motor for improved performance in single-motor applications. This mode uses a standard two-channel operation for single or dual-motor control. A third channel is required for dig operation.
In addition to crawling applications, the M2 Dig 3S ESC is ideal for applications that require two motors, such as robots, boats, tanks and submarines.
The M2 Dig 3S ESC can be fine tuned via Novak’s fully adjustable PC interface, the NovaLink™ (#5440). The NovaLink software is purpose-built for crawling. | ON-BOARD AND PC ADJUSTABILITY All three of the throttle profiles can be easily adjusted through Novak’s tried-and-true on-board set-up. There are four PCB-mounted LEDs to aid in programming and two different-colored external LED indicator lights – located at the ends of six-inch harnesses – that visibly display when a motor is locked and the vehicle is ready to dig. Additionally, the M2 Dig 3S ESC can be fine tuned via Novak’s fully adjustable PC interface, the Novalink™ (#5440). The Novalink software is purpose-built for crawling and assists in adjusting the speed control’s programmable features.
The powerful speed control also comes equipped with instant reverse via Novak’s Zero Reverse Delay, which provides immediate power delivery in both forward and reverse directions.
The M2 Dig 3S ESC includes two different-colored external LED indicator lights that visibly display when a motor is locked.
| NO MODIFICATIONS NECESSARY Like Novak’s Electronic Dig Unit (#5450), the M2 Dig 3S ESC does not require any vehicle modifications to install or operate. Simply plug it into any three-channel surface receiver, and you’re ready to crawl! The M2 Dig 3S ESC is easily programmed into most three-channel transmitters, such as the Spektrum® DX3R DSM2 3CH Surface Radio™, Airtronics’® M8 and M11 R/C Radios™, and a Traxxas® (TQ-3) Transmitter™.* M2 DIG 3S ESC/DUAL TERRA CLAW BRUSH COMBO FEATURES | | Fully programmable, user-friendly interface with five adjustable parameters: Drag Brake (10 settings), Dead Band (5 settings), Minimum Drive (10 settings), Drive Frequency (10 settings) and Battery Type Selection (3 settings – Li-Po, Li-Fe and NiMH) | | Independently powers the front or rear motors in a dual-motor crawler vehicle | | Applicable for dual-brushed motor or single-brushed motor applications | | 2-3S Li-Po/Li-Fe compatible via Novak`s auto-detect software | | Built-in PC connection with new Novalink for expanded programming | | Internal high-voltage five-amps switching regulator to provide six volts of output without overheating the speed control | | Universal JST Input Plug for Ch.2 and Ch. 3, which fits all popular brand receivers | | Water-resistant case with gasket seal | | Thermal Overload Protection | | Meets RoHS compliance and includes 120-Day Warranty | | Designed and assembled by Novak in Irvine, Calif., using globally-sourced components | |spacebar| | M2 DIG 3S ESC/DUAL TERRA CLAW BRUSH COMBO SPECS | | Input Voltage: 2-3S Li-Po/Li-Fe cells or 4-9 NiMH cells (1.2V/cell) | | On-Resistance (dual motor): 0.0016 ohm. at 25 degrees C trans. temp. | | On-Resistance (single motor): 0.0008 ohm. at 25 degrees C trans. temp. | | ESC Footprint: 1.16” x 1.47” (29.5 x 37.3 mm) | | ESC Weight (w/o wires): 1.30 oz. (36.9g) | | Motor Limit: 27-turn (2S), 33-turn (3S) 540-sized dual brushed motors | | BEC: 6.0 volts DC / 5.0 amps | | Status LEDs: 4 on-board; 2 external | | Voltage Cut-Off: 6.25V (2S Li-Po), 4.75V (2S Li-Fe), 9.75V (3S Li-Po) & 7.125V (3S Li-Fe) (when Li-Poly Cut-Off Circuitry is enabled) | | Power Wires: 14G Super-Flex Copper-Strand Silicone Wire | |spacebar| | REPLACEMENT / OPTIONAL PARTS | | #5315 (optional) or #5320 (replacement) User-replaceable Input Harness | | #5463 3-Amp High-Voltage Universal BEC (optional) | | #5508 14-Gauge Silicone Brushless Wire Set (replacement) | | #5647 Black Cooling Fan 25x25x10mm (replacement) | | #5679 Racing Power Trans-Cap Module - 2S Li-Po and 4-6 cell NiMH (replacement) | | #5731 Low-Loss Power Connectors – 3.5mm (optional) | | #S5603 Remote Programming Switch – Hardwired (replacement) | | * The Traxxas® (TQ-3) Transmitter™ must be modified with a three-position auxiliary switch to operate with the M2.
Berg™ is a registered trademark of EnRoute®. Integy® and Clod Buster® are registered trademarks. DX3R DSM2 3CH Surface Radio™ is a registered trademark of Spektrum®. M8 and M11 R/C Radios™ are registered trademarks of Airtronics®. TQ-3 Transmitter™ is a registered trademark of Traxxas®. M2 Dig 3S Dual Brush ESC™, Terra Claw Crawling Brush Motors – 55T and Novalink™ are registered trademarks of Novak Electronics, Inc.®.
변속기를 수신기와 만충된 배터리에 연결합니다. 조종기의 3채널(딕을 사용하기 위한 3채널)을 중간에 위치 시킨다. 1.조종기 켠다. 2.원터치버튼을 누르고 있는다. 3.원터치 버튼을 누른상태에서 변속기 전원을 켠다 -조종기 스로틀은 중립, 셋버튼은 계속 누르고 있는 상태에서 변속기의 on/off 스위치를 on한다. 4.적색불이 들어올때까지 셋버튼을 계속 누르고 있는다. 5.적색불이 들어오면 즉시 손을 뗀다. 6.조종기 스로틀을 최대로 땡긴다. -녹색LED가 켜질때까지 계속 땡기고 있습니다.. (모터작동은 없음) 7.조종기 스로틀을 최대로 민다. (풀브레이크) -녹색LED가 깜빡일때까지 유지한다. 8.조종기를 중립으로 한다. -조종기를 중립으로 하면, 청색과 적색LED가 틀어오고, 변속기는 딕설정이 준비된다. (당신이 가진 변속기가 싱글모터 타입이면 종료합니다.) 9.조종기 3채널을 한쪽으로 밀어줍니다. -청색과 녹색LED가 들어옵니다. 10.조종기 3채널을 다른한쪽으로 밀어줍니다. -청색LED는 들어오고, 녹색LED는 깜빡일 것입니다. 11.조종기 3채널을 중립위치로 원위치합니다. -청색,황색,적색LED가 들어오고, 요말은 변속기 셋팅종료 주:만약에 조종기 셋팅을 바꿀라면, 위의 셋팅을 반복합니다. 주:언제든지 원터치 셋업을 실행하면, 변속기를 공장출고 상태로 되돌릴수 있습니다.
|