- R/C용 악세사리입니다.
- 사진은 조립의 예이며, 차량 미포함입니다.

2170 - T4.1 front axle for 12mm hex conversion

 
T4.1 front axle for 12mm hex conversion
Part # - 2170
(Fits T4 line, requires #9880 AE steering block)
(Requires JC #2081 12mm clamping hex adaptor)
(Requires JC 3354W, 3354Y 12mm hex wheels)|spacebar|
 
One of the best upgrades you can make to the Team Associated line of vehicles is a conversion to 12mm hex wheels.|spacebar||spacebar| JConcepts has been on top of this conversion since its introduction with hex adaptors and Mono wheels.|spacebar| A critical point of the conversion revolves around the front axle and surrounding geometry.|spacebar||spacebar||spacebar| Within the steering block the space is very tight and especially between the 2 front bearings where the front axles rests between the bearing bores in 1 plane and the king pin in the perpendicular plane.|spacebar||spacebar||spacebar||spacebar| 
 
The JConcepts front axle design is based around high-quality steel construction, an outer bearing crush step and an inner 4-40 locknut for security.|spacebar||spacebar||spacebar| The design eliminates c-clips, screws and other items which are hard to detect of issues which limit performance.|spacebar||spacebar||spacebar| The free spinning design includes axles, 4-40 mini lock-nuts, thin axle shims, decal and assembly instructions.|spacebar| 
 
Assembly – 
 
Assembly is built from the outside in.|spacebar||spacebar| Slide on the outer wheel bearing from the outside of the axle and slide assembly through the (AE #9880) steering block.|spacebar||spacebar| Insert the roll-pin from the outside and slide on the hex adaptor.|spacebar||spacebar||spacebar| Holding the assembly by the hex adaptor, slide on the inner bearing along with thin axle shims and secure the entire assembly with the 4-40 locknut.|spacebar||spacebar||spacebar| Check for the intended amount of free play and spin the axle to check entire assembly.|spacebar| 
 
Features: 
•|spacebar|JConcepts design and function
•|spacebar|High-quality steel construction 
•|spacebar|Design eliminates frustrating components 
•|spacebar|Includes mini 4-40 locknuts